Author Topic: relative comparison  (Read 135 times)

0 Members and 1 Guest are viewing this topic.

Offline Jennifer S

  • Jr. Member
  • **
  • Posts: 88
relative comparison
« on: 27/11/2019, 09:57:47 PM »
Hi there
not sure if I have just forgotten, or something missing in my BC. I am trying to get the full list of investor stocks/ETFs to compare the relative comparison strengths/open/invalids etc. When I run this scan all I get is new entries (TPM). if I bring up the data sheet with the full lists from industry watch lists I don't get the comparison. 
What am I missing?
Thanks in advance

Offline Campbell Sinclair

  • Support & Administration
  • Administrator
  • *****
  • Posts: 230
Re: relative comparison
« Reply #1 on: 28/11/2019, 10:04:28 AM »
Hi Jennifer,

You may need to verify your SPA3 Investor Relative Strength scan settings in Beyond Charts.

To do this, open the scans panel on the right hand side of Beyond Charts. The easy way is right clicking an open chart background -> side panels -> scans.

In the scans panel highlight the scan name under the Profiles tab then click in to the Settings tab, also at the top of the scans panel. In here make sure the Scan Type is set to Ranking.

Offline Jennifer S

  • Jr. Member
  • **
  • Posts: 88
Re: relative comparison
« Reply #2 on: 28/11/2019, 12:58:14 PM »
Thanks Campbell, I was just looking around and found this exactly - thanks. It works!